Matters needing attention in the process of injection molding
Release time:
2024-09-05
Author:
Source:
As we all know, injection molding is a wide range of knowledge, technical and practical industry, in the entire injection molding production process to use plastic raw materials, toner, nozzle material, mold, injection molding machine, peripheral equipment, fixture, spray, a variety of accessories and packaging materials, etc., these to the injection molding workshop management has brought a lot of work and a certain degree of difficulty. Therefore, when we carry out injection molding, we must pay attention to the following three situations.
Different raw materials require different temperatures during injection molding. Too high or too low temperature will have a bad impact on injection molding. If the temperature is too low, it will affect the color of the liquid raw materials; if the temperature is too high, it is easy to produce burrs. Therefore, we should strictly control the temperature of injection molding according to the different raw materials.
2, in the process of injection molding, we also need to control the pouring speed, if it is too fast, it will easily produce burrs, and even lead to filling and burning. If it is too slow, there will be shrinkage and easy breakage. Therefore, when we are in the injection molding process, we must control the pouring speed to ensure that the quality of the products produced meets the requirements.
3. In the process of injection molding, we also need to pay attention to controlling the cooling time, and the specific time required needs to be determined according to the specific conditions of the processed products.
Previous:
Related Blog
E-mail:
Address:
South end of Shuangxiang Road in Luoyang Luoxin Development Zone
Message
* Note: Please fill in the information accurately and we will contact you as soon as possible!
